Язык

СЛЕДУЮЩЕМ:

Speed series

Главная » Товары » Speed series

Speed series

  • /img/mj_vr63_three_wire_integrated_speed_sensor.jpg
  • /upfile/2018/01/26/20180126164647_790.png
  • /upfile/2018/01/26/20180126164657_625.png
  • /upfile/2018/01/26/20180126164706_650.png
  • /upfile/2018/01/26/20180126164721_474.png

MJ-VR63 Three-wire integrated speed sensor

● MJ-VR63 integrated speed transmitter is currently the industry's most advanced technology, the country's leading technology leader in products. The transmitter is to use an analog circuit design structure compact, wide frequency response, anti-interference ability a three-wire system integration type current transducer, speed sensor and transmitter integrated one output of 4 ~ 20 ma current signal is directly connected to the PLC or DCS, it is widely used in the continuous measurement of all kinds of rotational speed.

Главная особенность:

1, non-contact detector, no moving parts, no wear and tear, safe and long life, low maintenance costs;

2, integrated spiral structure, easy to install.

3, simple wiring, current type, load short circuit protection.

Способ подключения:

Brown: + 24V

Blue line: signal output

Black: COM

известный:In kind Line mark shall prevail

Dimension chart:

Note:①gear size parameters: gear outer diameter: 99.3 mm;Teeth number: 60;Modulus: 1.57 (the above size is only one example, the module is 0.5 to 2).

②When installing the sensor, the tail is perpendicular to the connecting line and the gear plane.

③Sensor leads are: red for the power line; blue for the ground; black for the signal output line. (Note: the actual standard line).


Свяжитесь с нами >>
  • Описание
  • Характеристики
  • Parameter selection
  • Особенность
  • запрос

● MJ-VR63 integrated speed transmitter is currently the industry's most advanced technology, the country's leading technology leader in products. The transmitter is to use an analog circuit design structure compact, wide frequency response, anti-interference ability a three-wire system integration type current transducer, speed sensor and transmitter integrated one output of 4 ~ 20 ma current signal is directly connected to the PLC or DCS, it is widely used in the continuous measurement of all kinds of rotational speed.

Главная особенность:

1, non-contact detector, no moving parts, no wear and tear, safe and long life, low maintenance costs;

2, integrated spiral structure, easy to install.

3, simple wiring, current type, load short circuit protection.

Способ подключения:

Brown: + 24V

Blue line: signal output

Black: COM

известный:In kind Line mark shall prevail

Dimension chart:

Внимание:①gear size parameters: gear outer diameter: 99.3 mm;Teeth number: 60;Modulus: 1.57 (the above size is only one example, the module is 0.5 to 2).

②When installing the sensor, the tail is perpendicular to the connecting line and the gear plane.

③Sensor leads are: red for the power line; blue for the ground; black for the signal output line. (Note: the actual standard line).


1. Signal frequency:0-20kHz

поставка 2.Power:12-26V(DC)

3.Load resistance:≥1.0kΩ

4.Detection distance :0.5-2.0mm (A3steel,eletrical steel,magnetic steel mounting diatance is 6-10mm,magnetic consistent during installation)

5.Module of gear:m≥1

Материал шестерни:A3steel ,electrical steel 120℃

6.Output signal :4-20Ma,0-20mA,0-5V ,1-5V (For example: Current "4 ~ 20mA" Corresponding speed: 0 rpm / min to "Range upper limit" speed, (sensor factory setting)

7. Environmental conditions:Temperature range: -10 ~ +80 ℃

IP класс:IP68

8.Mounting screw:M16 × 1(или заказной)

9.Current consumption: ≤ 10mA (not including the load current)

10.Transmission error: ≤ 1%. Temperature drift <0.1%

11.Housing material: stainless steel 304

12.Load Equivalent Resistance Range: ≤600Ω (current output)

≥1000Ω (current output)

Parameter selection table :

Note: thread specifications can be customized according to user needs.

● Selection manual:

MJ-VR63-A□□-B□□-C□□-H□□-I□□-J□□-K□□

A:Thread mounting

B:Shell length

C:Lead way

H:Module of gear

I:measuring range

J:Cable length

K: Output method

Example: MJ-VR63-01-120-01-060-5000-01-01 selection of content: thread mounting: m16 * 1, shell length: 120mm, lead method: direct lead without armor, the number of teeth: 60 teeth , range: 5000 r / min, cable length: 2 meters, output mode: 4-20mA.


МЕНЮ
G|translate Your license is inactive or expired, please subscribe again!