MJ-VR9500 Portable vibration meter is comprised of Acceleration Transducer and hand-held Vibration meter. It can be used to measure the effective value and displacement peak-peak value of vibration acceleration and vibration velocity. It is easy to operate and convenient to carry, mainly used for steam turbines, water turbines, fans, pumps, compressors, Machine tools and other equipment to check quickly and preventive inspection for mechanical equipment failure.

1. Signal input: Acceleration Transducer 

2. Amplitude measurement range 

   Acceleration: 0.1 ～ 199.9m/s2(Half peak)

   Speed: 0.1 ～ 199.9mm/s (RMS/ the effective value)

   Displacement: 1 ～ 1999μm (Peak-Peak value)

3. Frequency Response

   Acceleration: 5Hz ～ 2000Hz

   Speed: 5Hz ～ 1000Hz

   Displacement: 5Hz ～ 500Hz

4. Accuracy: ±5%

5. Display Mode：Three and a half Digital LCD Display

6. Power Supply: 9V laminated battery. When the battery voltage is lower than 5.5V, there is a Low voltage prompt and automatic shutdown 2 minutes later.

7. Dimension: 185（H）×68（W）×30（D）mm

8. Weight: About330g