진동 센서 (트랜스 듀서)
MJ-VR280 디지털 진동 센서
● DSP 디지털 신호 프로세서
● RS485 디지털 인터페이스 첨부
● FFT 주파수 분석
● 소프트웨어 업그레이드 가능
● 저가, 설치가 용이
● Relay output(Optional)
MJ-VR280 digital vibration sensor is a low cost vibration sensor, which with DSP digital signal processor and RS485 digital interface. The mechanical vibration signal can be directly converted to digital waveform data, and through the RS485 interface of the sensor is transmitted to the computer. In order to make the sensor suitable for the wet environment, we select with stainless steel waterproof shell.
Sensor built-in DSP signal processor analyze vibration data through FFT( Fu Liye transformz), and calculated the acceleration, velocity and displacement. The sensor can directly output vibration wave data in time and frequency domain.
Up to 64 vibration sensors can be connected into a vibration measurement network,connected to the host of this network ( like PC computer) read vibration data, analyze and process data.
MJ-VR280 configuration / monitoring software is a free vibration sensor testing software, vibration data collected through computer software by sensor:
Cable signal definition:
MJ-VR280 digital vibration sensor adopted antivibration stainless steel hose lead structure, power supply and RS485 communication through 4 core (6 core) shielded cable, The definition of signal is different from the cable color., the following diagram illustrates the definition of sensor signal.
Cable signal definition
- 설명
- 명세서
- 파라미터 선택
- 특색
- 문의
● DSP 디지털 신호 프로세서
● RS485 디지털 인터페이스 첨부
● FFT 주파수 분석
● 소프트웨어 업그레이드 가능
● 저가, 설치가 용이
● Relay output(Optional)
MJ-VR280 digital vibration sensor is a low cost vibration sensor, which with DSP digital signal processor and RS485 digital interface. The mechanical vibration signal can be directly converted to digital waveform data, and through the RS485 interface of the sensor is transmitted to the computer. In order to make the sensor suitable for the wet environment, we select with stainless steel waterproof shell.
Sensor built-in DSP signal processor analyze vibration data through FFT( Fu Liye transformz), and calculated the acceleration, velocity and displacement. The sensor can directly output vibration wave data in time and frequency domain.
Up to 64 vibration sensors can be connected into a vibration measurement network,connected to the host of this network ( like PC computer) read vibration data, analyze and process data.
MJ-VR280 configuration / monitoring software is a free vibration sensor testing software, vibration data collected through computer software by sensor:
치수:
Cable signal definition:
MJ-VR280 digital vibration sensor adopted antivibration stainless steel hose lead structure, power supply and RS485 communication through 4 core (6 core) shielded cable, The definition of signal is different from the cable color., the following diagram illustrates the definition of sensor signal.
Cable signal definition
(This is for your reference only, with the factory defined as quasi).
Cable color |
Signal definition |
비고 |
RED |
POWER+ |
전원 공급 장치: 6-15Vdc |
YELLOW |
POWER- |
|
블루 |
RS485+ |
RS485 Communication interface |
BLACK |
RS485- |
|
그린 |
RELAY1 |
Relay (Optional) |
갈색 |
RELAY2 |
아니. |
프로젝트 |
��ħ |
1 |
진동 센서 |
piezoelectric type |
2 |
sensor type |
가속 |
3 |
vibration measurement range |
±50 g |
4 |
vibration resolution |
12 자리 |
5 |
주파수 범위 |
10-5kHz acceleration 10-1kHz velocity/displacement |
6 |
샘플링 속도 |
12.8kHz |
7 |
동적 범위 |
> 70dB |
8 |
nolinear |
0.2%(전 범위) |
9 |
data interface |
RS485 Industrial |
10 |
maximum Networked Sensors |
64 조각 |
11 |
힘 |
6-15Vdc |
12 |
work temperature |
- 40 ℃~+ 85 ℃ |
13 |
무게 |
450g 소개 |
14 |
크기 |
see below for details |
15 |
자료 |
304 housing |